Full 1:144 3D printed Assault Container parts
HG 1:144 3D printable File of Assault Container 強襲用コンテナ
from S1 of Gundam 00
by SHEW.gunpla 2021
Last update: 30/12/2021
Launch Day — Box art are made as “tradition"
發佈日 — 聽說盒繪有彩蛋？
Update: the file should be downloadable now
Traditional Chinese version in the bottom
繁體中文請拉至最底
<ENG>
DISCLAIMER:
This is NOT a weekend project, the ETA print time is 2 WEEKS with my Arteliery Sidewinder X1 (300x300 bed size) running back to back, ignoring the assembly time. ADVANCED Printer USERS ONLY, FDM only, but some might be fine for resin (you will have to decide it yourself, but basically parts other than the parts in the center blocky main compartment).
HG GN Arms type E, HG GN Arms type D, HG Exia, HG Dynames, RG Exia is NOT INCLUDED
Thanks you for the support to my project. Special thank you to T.Wata on GrabCAD for the 1:144 Gn arms, as i wont be able to start this project from scratch. All parts arecolour seperated and with print orientation considered in the free version. The paid version has all the parts in stl form seperately.
There is a free download link below, feel free to support me with the Paid version, with all stl comes sparately.
FREE LINK INSTRUCTION:
1. Print blue and white part
2. Send a finished blue and white print photo to me via SHEW.gunpla FB messenger
3. Grey part send to you
4. Print
5. Remove supports
6. Follow the video to ASSEMBLE
Cults3D LINK INSTRUCTION:
1. Print all the parts ( certain folder will be labeled as x2, which needed to be printed twice)
2. Remove supports
3. Follow the video to ASSEMBLE
Print recommendations:
layer height: 0.2 (0.1 works too but it takes a lot longer)
AUTO raft
AUTO support EVERYWHERE, 5%
Infill: lightning in cura as recommanded, 3% min
The default scale is 1:144, while you can scale it with 1.44 into 1:100, there will be no 1:100 GN arms to my knowledge that fits this design.
Requirement:
HG GN Arms type E/ HG GN Arms type D
HG Exia/ HG Dynames/RG Exia
Assembly:
<繁體中文>
警告：
此作品需要極長的打印， 即使擁有（Artillery Sidewinder X1) 300x300mm 的打印面積也需要兩星期不眠不休地的打印，組裝時間的另計，請自行衡量時間。不建議新手打印，建議使用fdm 打印，部分件可以由resin 打印方式取代（需由用家自行衡量）
注： HG GN Arms type E, HG GN Arms type D, HG Exia, HG Dynames, RG Exia 需另行購買。
多謝下載此設計。特此嗚謝 GrabCAD 上 T.Wata的 1:144 Gn arms,
下面有免費下載的連結，也可於其他網站支持我。免費下載連結中只會有部分零件。設計本身已經完成分色，免費下載的零件方向已預設為方便FDM打印，請放心打印。付費版則有獨立stl。
免費下載連結使用方法：
1. 打印免費的藍色與白色的零件
2. 請私訊你所有部件打印完成的照片至我們facebook 專頁'SHEW.gunpla'以領取下一分割檔。
3. 最後灰色的分割檔將會傳至你的私信中
4. 打印
5. 清除支撐
6. 觀看組裝影片以完成組裝
Cults3D LINK 使用方法:
1. 打印所有的零件（包括藍色，白色與灰色, 部分文件夾會有「x2」標籤，請打印兩份）
2. 清除支撐
3. 觀看組裝影片以完成組裝
打印建議:
layer height: 0.2 (0.1 works too but it takes a lot longer)
AUTO raft
AUTO support EVERYWHERE, 5%
FDM infill: lightening from Cura, 最少3%
預設大小為1:144
以下模型需要另行購買:
HG GN Arms type E/ HG GN Arms type D
HG Exia/ HG Dynames/RG Exia
組裝影片:
#gnarms #gnarmstypee #gnarmstyped #exia #dynames #hg #rg #1/144 #cad #fusion360
All Files